Today, cosmetic repairs are considered one of the economical options, effective and affordable ways to give your apartment a new look and put it in order. Cosmetic repairs imply not only repainting the ceilings, swing of wallpaper or replacement of the flooring. This is a much wider range of work. Professionals with this term determine the repair, during which the room is updated, but not redeemed. This includes the replacement of doors and window frames, cladding walls with tiles in the bathroom or in the kitchen, installing decorative ceiling coatings. Where should the cosmetic repairs start? On the Profirem website you can learn more about the cosmetic repair of apartments and not only.
First you should free the room from furniture. If this is not possible, free the walls as much as possible, ensuring an unhindered approach to them. In this case, you can simply move the furniture to the center and cover with a film. If you do not plan to replace or update the flooring, you should worry about protecting it from pollution and damage.
The next step is the preparation of ceilings and walls. It is necessary to remove existing, previous coatings. It is impossible to wash water-dispersion enamel or paint with water, they are removed using a spatula. In whitewashing from the ceiling and walls to remove it is much easier: it is washed off up to the putty layer. Special skills are not required here, this work is simple. One condition – it is necessary to do everything very carefully, otherwise the remnants of whitewashing will affect the quality of the new coating. Old wallpapers are removed in a similar way: first exfoliated areas are removed, and more steadily holding fragments are moistened with water and then removed with a spatula. Alkyd or oil enamel is removed using special preparations, the so -called “wash”.
After stripping the ceiling and walls, it is necessary to start processing them. For this, soil compositions, hygroscopic bases are used. Then deep cracks, potholes and other damage are covered with cement mortar. After that, a primer is applied to the processed surfaces, then putty. Thus, the surfaces are aligned. Before staining the ceiling, it is necessary to remove minor defects from its surface. Use water-dispersion paint, this will help to consider the previously invisible roughnesses. Eliminate them with grinding and only after that apply undamosed paint.
By putting the ceiling in order, you can proceed to gluing walls of walls. You can start pasting with any comfortable area, even from the window, at least from the door. The wallpaper is smeared from the back side with glue and applied to the wall. For a denser fit, it is recommended to smooth them with a roller or a hard brush. In the event of excess wallpaper under the ceiling or by the baseboard, they must be removed with a sharp knife. It is worth remembering one rule – in no case should you allow drafts in the room, this will lead to an uneven shrinkage of wallpaper.